ULTIMATE FURNACE INSTALLATION INSTRUCTIONS

So why would a contractor not want you to have this guide and attempt to install your own furnace? Well, they will play on your emotions and your sense of responsibility to your family. They will say “YOU CANNOT DO A FURNACE INSTALLATION! YOU’LL RISK THE SAFETY OF YOUR FAMILY! YOUR KIDS! FURNACE INSTALLATIONS ARE FOR PROFESSIONALS ONLY!” Blah – Blah – Blah – I have heard it a million times. This is a blatant lie. YOU ABSOLUTELY CAN INSTALL YOUR OWN FURNACE. You will do just that with the help of this step-by-step guide book. Not only that, but you will also keep $1,000 – $5,000 in your pocket by doing the installation yourself!

Let me tell you a bit about my background. I have been an HVAC contractor for over 20 years. I have accomplished furnace installations in hundreds of different environments, and thousands of homes in my lifetime. I just plain know how to install furnaces! I wrote this book with the average homeowner – YOU – in mind.

After writing the book I handed it over to my wife to edit. My wife does not know anything about installing furnaces. She was the perfect candidate to edit the book. I figured if she got done with it and felt confident about installing a furnace my job was done! She found a “problem” with my writing though. She said I was writing as if everyone would just know what I was talking about. So after a month of detailed explanations and diagrams (I even made some ductwork out of paper so she could understand how it fit together!) she handed me the finished draft. She smiled and said “This is a really good book, Babe.”

Take a look at what you’re going to get:

TABLE OF CONTENTS

Introduction

Table of Contents

Tool List – page 4

• Assessing Your Home
• Assessing Your Homes’ Heating and Cooling System
• Materials List – Ductwork
• Materials List – Electrical Hookup.
• Materials List – Gas Line

1. Materials List – Miscellaneous
2. Materials list  – 80% efficient furnace

• Materials list  – 90% efficient furnace Finding Local Suppliers To Work With
• Removing Power and Fuel Supply
• Securing Existing Ductwork
• Removing the Old Equipment
• Putting It All Back Together

1. Aligning the Furnace
2. Attaching Return and Boot To Furnace
3. The Transition – Connecting the Plenum To the Furnace
4. Connecting the Gas Line
5. Exhausting the Flue Gases
6. Installing the Thermostat and Wiring

• Starting Up Your New Equipment
• Tutorial – Putting Ductwork Together
• Disclaimer
• Index

Chapter 8 alone will save you thousands of dollars, even if you hired a contractor to do the furnace installation!

Let’s read what some of our readers have said: